Four column pneumatic hot melt

1. Adopting a four column design, the structure is reasonable, safe and practical, and the rise and fall are relatively stable (without tilting back) 2. Install safety nets on all sides of the entire machine, leaving a space of 200mm under the front protective pattern 3. The cylinder pressure can be adjusted from 0 to 15 kg, and the stroke can be adjusted from 0 to 50 mm, which can be operated automatically and manually 4. When manually adjusting the machine, fine adjustments can be made (0-125 mm)
Product Description

Four Column Pneumatic Hot Melt

1. Product performance:

1. Adopting a four column design, the structure is reasonable, safe and practical, and the rise and fall are relatively stable (without tilting back)

2. Install safety nets on all sides of the entire machine, leaving a space of 200mm under the front protective pattern

3. The cylinder pressure can be adjusted from 0 to 15 kg, and the stroke can be adjusted from 0 to 50 mm, which can be operated automatically and manually

4. When manually adjusting the machine, fine adjustments can be made (0-125 mm)

5. The fusion time can be set to the desired position to start and stop

6. The levelness of the heating plate is relatively high (± 0.05 mm)

 

2. Product parameters:

Power: 3500W

Weight: 150kg

Power supply voltage: 220V20A

Heating area: 280-420

 

Pneumatic Hot Melt

Send Inquiry
For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.